 | |
Automotive applications
General description:
Xenlight 3rd generation ballasts are primarily designed for the automotive industry, and are fully computerized to meet all automotive industry demands for Xenon HID Headlight Systems.
Ballast Main Features:
- Low Electro Magnetic Interferences. (Even with plastic housing).
- Safety - No electric shock risk (no DC phase at startup, High frequency).
- High efficiency - 90%, results in very low ∆T over wide range of operating conditions.
- Fully computerized ballast.
- LIN diagnostic interface (Local Interconnect Network CAN sub bus).
- Dimmable ballast, analog or digital remote.
- Operates D1S or D2S bulbs.
- Active false input polarity protection.
- Short output protection.
- Open output protection.
- Input over voltage switches off with automatic restart.
- Input under voltage shut down.
- Negative lamp supply voltage in respect of car ground.
- Fast restart cycles.
- Patent protected.
- Custom made ballasts on request.
Electrical specifications for 12V ballasts:
|
Normal operating input voltage range |
9V - 16V |
|
Time limited extended operating input voltage range |
6V - 18V |
|
Starting input voltage range |
8.5V - 18V |
|
Nominal output power |
34.5W 1W |
|
Low output power setting |
25W 1W |
|
Maximum run up output power |
75W |
|
Maximum run up lamp amperes |
2.0 A |
|
Maximum inrush current at 13.5 V |
8 A |
|
Efficiency of D1S and ballast at nominal supply |
87% |
|
Ballast unit efficiency |
89% |
|
Output steady state frequency |
4.5 KHz |
|
Operating temperature range |
-40 to +105 C |
Electrical specifications for 24V ballasts:
|
Normal operating input voltage range |
22V - 29V |
|
Extended operating input voltage range |
16V - 32V |
|
Starting input voltage range |
22V - 32V |
|
Nominal output power |
34.5W 1W |
|
Low output power setting |
25W 1W |
|
Maximum run up output power |
75W |
|
Maximum run up lamp amperes |
2,0 A |
|
Maximum inrush current at 27 V |
4 A |
|
Efficiency of D1S and ballast at nominal supply |
87% |
|
Ballast unit efficiency |
89% |
|
Output steady state frequency |
4.5 KHz |
|
Operating temperature range |
-40 to +105 C |
*Xenlight reserves the right to modify / change specifications from time to time without any advance notice.
Other specifications:
Housing- Shielded unpotted metal housing, or plastic housing filled with resin.
Connections- Input: 2 wires for power, 1 wire for LIN drive, 1 wire analog remote sense
Output: 3 wires for D1S or D2S (with igniter) bulb.
Weight- Approx 200 g. | 
)
 "XLM")
 "XLS")
 "XLR")
