35W 12/24V Xenon Slow Start Ballast Specification

General description:

Xenlight 3^rd generation slow start ballasts are primarily designed to run up short arc HID lamps with minimum current in order to prolong life time of the bulbs especially UV bulbs such as MPXL DUV. Our ballasts are fully computerized to meet all standards for xenon HID UV systems.

Ballast Main Features:

• Low Electro Magnetic Interferences. (Even with plastic housing).
• Safety - No electric shock risk (no DC phase at startup, High frequency).
• High efficiency - 90%, results in very low ∆T over wide range of operating conditions.
• Fully computerized ballast.
• LIN diagnostic interface (Local Interconnect Network CAN sub bus).
• Dimmable ballast, analog or digital remote.
• Operates D1S or D2S bulbs.
• Active false input polarity protection.
• Short output protection.
• Open output protection.
• Input over voltage switches off with automatic restart.
• Input under voltage shut down.
• Negative lamp supply voltage in respect of car ground.
• Fast restart cycles.
• Patent protected.
• Custom made ballasts on request.

Electrical specifications for 12V ballasts:

Normal operating input voltage range	9V - 16V
Time limited extended operating input voltage range	6V - 18V
Starting input voltage range	8.5V - 18V
Nominal output power	34.5W 1W
Low output power setting	20W 1W
Maximum run up output power	40W
Maximum run up lamp amperes	1.5 A
Maximum inrush current at 13.5 V	5 A
Efficiency of D1S and ballast at nominal supply	85%
Ballast unit efficiency	86%
Output steady state frequency	6.7 KHz
Operating temperature range	-40 to +85 C

Electrical specifications for 24V ballasts:

Normal operating input voltage range	22V - 29V
Extended operating input voltage range	16V - 32V
Starting input voltage range	22V - 32V
Nominal output power	34.5W 1W
Low output power setting	20W 1W
Maximum run up output power	40W
Maximum run up lamp amperes	1.5 A
Maximum inrush current at 27 V	4 A
Efficiency of D1S and ballast at nominal supply	85%
Ballast unit efficiency	87%
Output steady state frequency	6.7 KHz
Operating temperature range	-40 to +85 C

*Xenlight reserves the right to modify / change specifications from time to time without any advance notice.

Other specifications:

Housing-          Shielded unpotted metal housing, or plastic housing filled with resin.

Connections-  Input: 2 wires for power, 1 wire for LIN drive, 1 wire analog remote sense

                           Output: 3 wires for D1S or D2S (with igniter) bulb.

                           Weight: Approx 200 g.

Dimensions:

Body dimension without mounting ears or connectors outlet