50W 12/24V Xenon Ballast Specification

General description:

Xenlight 3^rd generation 50W ballasts are primarily designed for Off-Road use (agricultural vehicles, ATV etc'), Aviation (landing and taxi lights), Marine applications, Medical devices and Working lights. Xenlight's ballasts are fully computerized to meet all automotive industry demands for Xenon HID Systems, ensures of having the highest quality available for any application.

Ballast Main Features:

• Low Electro Magnetic Interferences. (Even with plastic housing).
• Safety - No electric shock risk (no DC phase at startup, High frequency).
• High efficiency - 90%, results in very low ∆T over wide range of operating conditions.
• Fully computerized ballast.
• LIN diagnostic interface (Local Interconnect Network CAN sub bus).
• Dimmable ballast, analog or digital remote.
• Operates D1S or D2S bulbs.
• Active false input polarity protection.
• Short output protection.
• Open output protection.
• Input over voltage switches off with automatic restart.
• Input under voltage shut down.
• Negative lamp supply voltage in respect of car ground.
• Fast restart cycles.
• Patent protected.
• Custom made ballasts on request.

Electrical specifications for 12V ballasts:

50W - D2S bulbs with Xenlight igniter only

Normal operating input voltage range	9V - 16V
Time limited extended operating input voltage range	6V - 18V
Starting input voltage range	8.5V - 18V
Nominal output power	49W 2W
Low output power setting	25W 1W
Maximum run up output power	50W
Maximum run up lamp amperes	2.0 A
Maximum inrush current at 13.5 V	8 A
Ballast unit efficiency	89%
Output steady state frequency	4.5 KHz
Operating temperature range	-55 to +105 C

Electrical specifications for 24V ballasts:

50W - D2S bulbs with Xenlight igniter only

Normal operating input voltage range	22V - 29V
Extended operating input voltage range	16V - 32V
Starting input voltage range	22V - 32V
Nominal output power	49W 2W
Low output power setting	25W 1W
Maximum run up output power	50W
Maximum run up lamp amperes	2.0 A
Maximum inrush current at 27 V	4 A
Ballast unit efficiency	89%
Output steady state frequency	4.5 KHz
Operating temperature range	-55 to +105 C

*Xenlight reserves the right to modify / change specifications from time to time without any advance notice.

Other specifications:

Housing-           Shielded unpotted metal housing, or plastic housing filled with resin

Connections-   Input:      2 wires for power, 1 wire for LIN drive, 1 wire analog remote sense

                            Output:  3 wires for D1S or D2S (with igniter) bulb

Weight-              Approx 200g

Dimensions:

Body dimension without mounting ears or connectors outlet